Nectre Mk2

The Nectre Mk2 is beautifully compact but yet powerful enough to heat around 185m2 of living area. With its high efficiency rating and modest heat output, the Nectre Mk2 is a welcome addition to your home.

Freestanding Pedestal

Freestanding Legs









Radiant/Convection Wood Heater

Nectre Mk2  dimensions

Pedestal model size : 750mm (w) x 745mm (h) x 445mm (d) - base width 650mm

Legs model size :       750mm (w) x 680mm (h) x 445mm (d) - base width 580mm


Wood Heaters  |  N15Mk1  |  Mk2  Mk3  |  MEGA  |  Inbuilt  N60

Nectre Mk2 LE provides excellent convection heat while producing unbelievable low emissions of 0.82g/kg

"Simple but elegant with amazing emissions rating of 0.82g, which is proudly designed and manufactured in Australia"

Additional Features

Nectre Mk2 is finished in black metallic paint and comes with cast iron door with ceramic glass and a stay cool spring handle. Steel baffle with steel brick retainer and firebrick lining to improve thermal mass.

  • A 900mm x 900mm hearth is required.

  • Door aperture is 250mm x 495mm.

  • Total weight of the Nectre Mk2 legs is 140kg and Pedestal is 160kg

  • 10 year firebox warranty on Nectre Mk2.


We recommend having a professional install any of our Nectre heaters. Our Dealers can arrange installation and most cases will undertake a site inspection to determine the correct location.

Optional 3 speed fans

The Nectre Mk2 can be fitted with a 3 speed fan. The optional fan for the pedestal model is a twin barrel and fitted within the base. A single barrel fan is offered with the Leg model and is mounted on the rear of the unit. A further 75mm clearance from the wall is required on the leg model.

Heater Clearances

Installation clearance distances for the Nectre Mk2 are as follows:

   125mm from rear of heater to wall in a standard installation (square to walls).

   450mm from side of heater to wall in a standard installation (square to walls).

   200mm from rear corner of heater to wall in corner installation.

Flue and Hearths

Nectre Mk2 is not supplied with a flue from the factory. Our Dealers all provide suitable a flue and or decromesh kits required for installation. Nectre heaters do not come with hearths, our Dealers can supply a suitable hearth for your requirements.


The Nectre Mk2 has been designed and manufactured to exceed the strict AS/NZS 4013 standards for emissions of 1.5g / kg of fuel burnt and efficiency of 60%. 





                      Always burn seasoned

                      dry hard wood.


Radiant/Convection Heat

The Nectre Mk2 release their heat through a combination of heat radiation, which heats objects, and convection which heats the air. Excellent for feeling the heat of the flame and warming the surround living space.

NATA Tested

The Nectre Mk2  has been tested and approved in a NATA accredited testing facility of Adelaide Heating Technology Pty Limited.

Product disclaimer

Glen Dimplex Australia continually strives to improve the performance of all our Nectre heaters and stoves. We reserve the right to change or alter sizes and or specifications without notice. Efficiency quoted are peak based on a low burn cycle. Burn times quoted are up to and can vary depending on wood, installation and heater condition. Emissions quoted are grams per kilogram. Safety, emissions and efficiency testing is in accordance with AS/NZS 4013, AS/NZS 4012, AS/NZS 2918:2001


Technical Details of Nectre Mk2 LE

Top view

Pedestal model dimensions

Leg model dimensions


Flue shielding
900mm rear flue shield
C = 400mm (350mm for Pedestal model), D = 200mm

Decro-mesh with 900mm inner reflector
C = 400mm (350mm for Pedestal model), D = 125mm


Door aperture is 250mm x 495mm


Flue shielding
900mm rear flue shield
A = 450mm, B = 125mm, C = 400mm
(350mm for Pedestal model)

Decro-mesh with 900mm inner reflector
A = 350mm, B = 125mm, C = 400mm
(350mm for Pedestal model)


Door aperture is 250mm x 495mm

Download a single

page brochure.

Download the Nectre

Traditional range brochure.