Information

© 2018  All rights reserved, Nectre is a registered trademark of Glen Dimplex Australia

  • LinkedIn Social Icon

Nectre 15

The Nectre 15 is beautifully compact but yet powerful enough to heat around 140m2 of living area. With its high efficiency rating and modest heat output, the Nectre 15 is a welcome addition to your home.

Freestanding Pedestal

Freestanding Legs

86%

1.3g

8-10hr

15sq

350mm

6.0mm

15kW

.036m3

Radiant Wood Heater

Nectre 15  dimensions

Pedestal model size : 460mm (w) x 725mm (h) x 450mm (d) - base width 460mm

Legs model size :       460mm (w) x 660mm (h) x 450mm (d) - base width 420mm

 

Our Nectre 15 provides amazing radiant heat for growing families.

Wood Heaters  |  N15Mk1  |  Mk2 Mk3  |  MEGA  |  Inbuilt  N60

"Compact yet a powerful traditional wood heater which is proudly designed and manufactured in Australia"
 

Additional Features

Nectre 15 is finished in black metallic paint and comes with cast iron door with ceramic glass and a stay cool spring handle. Steel baffle with steel brick retainer and firebrick lining to improve thermal mass.

  • A 900mm x 900mm hearth is required.

  • Door aperture is 250mm x 345mm.

  • Total weight of the Nectre 15 is 90kg.

  • 10 year firebox warranty on Nectre 15

Installation


We recommend having a professional install any of our Nectre heaters. Our Dealers can arrange installation and most cases will undertake a site inspection to determine the correct location.

Product disclaimer

Pecan Engineering continually strives to improve the performance of all our Nectre heaters and stoves.

We reserve the right to change or alter sizes and or specifications without notice. Efficiencies quoted are peak based on a low burn cycle. Burn times quoted are up to and can vary depending on wood, installation and heater condition. Emissions quoted are grams per kilogram. Safety, emissions and efficiency testing is in accordance with AS/NZS 4013, AS/NZS 4012, AS/NZS 2918:2001

 

Heater Clearances

Installation clearance distances for the Nectre 15 are as follows:

   175mm from rear of heater to wall in a standard installation (square to walls).

   750mm from side of heater to wall in a standard installation (square to walls).

   750mm from rear corner of heater to wall in corner installation.

Flue and Hearths


Nectre 15 is not supplied with a flue from the factory. Our Dealers all provide suitable a flue and or decromesh kits required for installation. Nectre heaters do not come with hearths, our Dealers can supply a suitable hearth for your requirements.

Compliance


The Nectre 15 has been designed and manufactured to exceed the strict AS/NZS 4013 standards for emissions of 1.5g / kg of fuel burnt and efficiency of 60%. 

FAQ

 

 

                   

                       Always burn seasoned

                       dry hard wood.

 

Radiant Heat


The Nectre 15 firebox, radiates heat  towards furniture and objects around the living area. Radiant heat is excellent if you want to sit in front while watching the flame.

NATA Tested


The Nectre 15 has been tested and approved in a NATA accredited testing facility of Adelaide Heating Technology Pty Limited.

Product disclaimer

Glen Dimplex Australia continually strives to improve the performance of all our Nectre heaters and stoves. We reserve the right to change or alter sizes and or specifications without notice. Efficiency quoted are peak based on a low burn cycle. Burn times quoted are up to and can vary depending on wood, installation and heater condition. Emissions quoted are grams per kilogram. Safety, emissions and efficiency testing is in accordance with AS/NZS 4013, AS/NZS 4012, AS/NZS 2918:2001

 

 
Technical Details for Nectre 15
 
 

CORNER INSTALLATION

STANDARD INSTALLATION

Flue shielding
900mm rear flue shield
C = 300mm, D = 750mm

C = 300mm, D = 225mm (when fitted with side sheilds)

Decro-mesh with 900mm inner reflector
C = 300mm, D = 750mm

C = 300mm, D = 225mm (when fitted with side shields)

Flue shielding
900mm rear flue shield
A = 750mm, B = 175mm, C = 300mm

A = 450mm, B = 125mm, C = 300mm (when fitted with side shields)

Decro-mesh with 900mm inner reflector
A = 750mm, B = 175mm, C = 300mm

A = 450mm, B = 175mm, C = 300mm (when fitted with side shields)

Download a single

page brochure.

Download the Nectre

Traditional range brochure.